Home > knowledge > Content
Thermoplastic resins
Jun 01, 2017

In the broad classification of plastics there are two generally accepted categories: thermoplastic resins and thermosetting resins.

Thermoplastic resins consist of long polymer molecules, each of which may or may not have side chains or groups. The side chains or groups, if present, are not linked to other polymer molecules (i.e., are not cross-linked). Thermoplastic resins, usually obtained as a granular polymer, can therefore be repeatedly melted or solidified by heating or cooling. Heat softens or melts the material so that it can be formed; subsequent cooling then hardens or solidifies the material in the given shape. No chemical change usually takes place during this shaping process.

In thermosetting resins the reactive groups of the molecules from cross-links between the molecules during the fabrication process. The cross-linked or ured material cannot be softened by heating. Thermoset materials are usually supplied as a partially polymerized molding compound or as a liquid monomer杙olymer mixture. In this uncured condition they can be shaped with or without pressure and polymerized to the cured state with chemicals or heat.

With the progress of technology the demarcation between thermoplastic and thermoset processing has become less distinct. For thermosets processes have been developed which make use of the economic processing characteristics or vaccum forming plastics. For example, cross-linked polyethylene wire coating is made by extruding the thermoplastic polyethylene, which is then cross-linked (either chemically or by irradiation) to form what is actually a thermoset material that cannot be melted again by heating. More recently, modified machinery and molding compositions have become available to provide the economics of thermoplastic processing to thermosetting materials. Injection molding of phenolics and other thermosetting materials are such examples. Nevertheless, it is still a widespread practice in industry to distinguish between thermoplastic and thermosetting resins.

Compression and transfer molding are the most common methods of processing thermosetting plastics. For thermoplastics, the more important processing techniques are extrusion, injection, blow molding, and calendaring; other processes are thermoforming, slush molding, and spinning.


Previous: No Information

Next: No Information

Related Industry Knowledge